Lagos, Nigeria
info@ezefidelity.com

VR Oculus Quest 2: How to Troubleshoot Controller Tracking Issues – Technipages


The default control method for your Oculus Quest 2 VR headset is the pair of included controllers. They’re pretty versatile and are the only supported controller in many games. Occasionally though, you may find that the headset loses track of where the controllers are.

This is frustrating if it is often happening or if it happened once when you were close to beating a new song in Beat Saber, for example. If you’re struggling with controller tracking issues, we’ve pulled together a list of troubleshooting tips to help you out.

Check the Headset Tracking Cameras Are Clean

The Quest 2 headset keeps track of your controllers and surroundings by using cameras embedded in the headset. Obviously, for these cameras and the tracking they facilitate, the cameras need to have a clear view to be able to work. Check that you’ve not put any stickers or decals etc., over any of the camera lenses. If the lenses don’t have anything obvious blocking them, give them a quick wipe down as dirt on the lens can also cause tracking issues.

Too Bright or Too Dark

Being a camera system, the tracking needs light to be able to work. Ensure that your play-space is well lit as dim-light or darkness will cause tracking issues. Just beware that too much light can also be a problem, especially direct sunlight. The Quest 2 is not designed for use outside and can struggle if it’s dazzled by direct sunlight or glare from the sun. If you’re inside and have a lot of natural light streaming in from a window, try closing the curtains or blinds a bit to reduce the glare.

LEDs and Mirrors

The headset uses the cameras to track the controllers. Still, it does so with the help of infrared LEDs embedded in the controllers. Many users find that other LEDs in their house can confuse the Quest 2, especially Christmas lights. If you’re experiencing tracking issues and are in a room with Christmas lights or other LEDs, try turning them off and see if the issue persists.

Similarly, large or just unfortunately placed mirrors can confuse the tracking system with conflicting information. If you’re playing near a mirror, try moving or covering it, or try to select another play-space.

Controllers Are out of or Low on Battery

The Quest 2 controllers each use a single AA battery. While the controller batteries can last for a surprising amount of time, they do need changing occasionally. Near the end of the battery life, you may experience more controller tracking issues. If your battery levels are low, try replacing them.

If you’re experiencing issues when using rechargeable batteries, you may also want to try switching to single-use AA batteries—the rechargeable batteries output 1.2V rather than the standard 1.5V, contributing to tracking issues.

Tip: When you’re replacing the batteries, you might also want to restart the headset itself as well as this can fix many issues.

Change Tracking Frequency

We mentioned before that LEDs can cause tracking issues. Generally, LED bulbs don’t have quite the same issue; however, that doesn’t mean they can’t cause issues. LEDs emit light when electrons flow over the LED. The power delivery in homes uses alternating current (AC) pulses at either 50 or 60 Hz, depending on which country you live in. This electricity pulse causes the LED to flash on, but it then turns off again between the pulses.

The speed of these pulses is fast enough that you can’t really see the pulses, although you may be able to notice an LED bulb flickering out of the corner of your eyes. It’s a lot easier to see the effect if you pull out your phone camera, though, generally, you’ll see a weird flickering effect, which can be even more noticeable in the slow-motion video camera; that just doesn’t happen in natural lighting.

The Quest 2 headset attempts to automatically compensate for the flickering rate of LED light bulbs. But if you’re having tracking issues you can’t resolve, you can try overriding the setting yourself. You can change this setting by opening up the settings, switching to the “Device” menu then choosing between Automatic, 50 Hz, or 60 Hz.

Change your Tracking Frequency rate in the Device settings.

Troubleshooting intermittent issues can be a real pain. By following the steps in this guide, you should be able to resolve most controller tracking issues. If your issues persist, however, you may want to try contacting Oculus support.



This post was written by Mel Hawthorne and was first posted to Technipages



Do you find this article helpful? Your Friend might too. So, please Share it with them using the Share button above.
Will you like to get notified when I post new updates? Then Follow me on any of my social media handles: Google News, Telegram, WhatsApp, Twitter, Facebook, Pinterest.
You can also drop your email address below if you wish to be notified by mail.


Tags: , , ,

%d bloggers like this: