In previous articles, I’ve discussed several common reasons your computer might be slowing down.
Naturally, there are a host of uncommon reasons as well. If you’ve looked at all the usual suspects and none of them seem to apply, it might be time to look a little deeper. They’re often not as easily fixed, but they’re definitely worth being aware of.
Less common causes of computer slowdowns include:
- Hardware issues
- Out-of-date software
- Long-running machines
- Display color depth
- Slow CPUs
Hardware fails in several different ways. Often it’s sudden, immediate, and clear. Other times, however, failure can be gradual and happen in stages. Much like bad sectors on a traditional hard disk, hardware connected to the computer — everything from networking cables to video display adapters to mice and more — can fail gradually.
And “gradually” can manifest as a perceived slowdown of the computer.
The best thing to do here is to keep an eye on the characteristics of the slowdown. See if it manifests only or most often when doing certain things, and then think about the hardware components involved.
Out-of-date system, drivers, and applications
Often, the problems we experience are related to problems inherent in the software installed on our machines.
For a variety of reasons — usually related to security, but sometimes impacting speed — it’s important to keep your system up to date. Your computer’s speed can also be impacted as those issues get resolved.
You haven’t rebooted lately
Much like a fragmented hard disk, things can get kind of disorganized in a computer that’s been left on for a long time. It varies dramatically based on how you use the computer and what applications you run, but it can sometimes contribute to performance issues.
Fortunately, the solution is relatively simple: reboot once in a while. It’s good for the machine and resolves any speed issues that might be related.
Since I leave my computers powered on all the time, in the past I’ve had some machines reboot automatically once a night. Other computers — those dedicated to a few tasks — don’t need to reboot as often, so I let them run until there’s some reason to do so. Sometimes a Windows Update forces the issue by requiring a reboot.
This is less of a “problem” and more of an opportunity.
Color depth is the number of different colors each pixel or dot on your computer screen can display. The more colors your video card is able to display, the more memory is required by Windows, as it manages the display, and possibly by applications attempting to display things. This added need for memory can slow things down a bit.
The most common settings are 16-, 24- or 32-bit color, representing 65,000, 16,000,000 million, or 4,000,000,000 different possible colors (and sometimes “intensity”) for any individual pixel on your screen.
Most computers today come configured for 24- or 32-bit color, and some modern hardware will not support less than that. However, older hardware can often support less color depth, and it’s this older hardware that may benefit from selecting a lower number, such as 16-bit color. This means the computer doesn’t have to deal with as much information simply to maintain what’s on the screen, which can increase your speed.
You’ve never defragged
This is significantly less of a problem than it once was, but I’ll mention it anyway. It’s only an issue for people running Windows prior to Windows 7, with traditional magnetic hard drives (not SSDs). Windows 7 and later versions automatically defrag attached magnetic hard drives weekly, and defragging doesn’t apply to SSDs.
Fragmentation is a performance issue relating to how files are laid out on a hard drive’s surface. I’ve likened it to a book whose pages have been detached and spread out around a home. In order to read the book, you need to locate each page in order, read it, and then find the next page. It’s much easier and faster to have the pages already gathered in order. The same applies to how files are stored on a hard disk.
Fragmentation gets worse over time, as files are deleted and written to the hard disk.
Defragmentation should happen “once in a while”; Windows 7’s default of once a week is fine. More often, you’d probably never notice the difference.
If you’re running a version of Windows prior to Windows 7 and you’ve never defragmented your hard disk, you could be experiencing significant slowdowns as a result. I recommend you do so periodically.
It does have to be said: sometimes the CPU is simply no longer up to the task. What was once a blazingly fast machine is now a slow behemoth.
That may simply be due to the nature of progress.
Modern operating systems and applications are more likely to assume modern (or at least close to modern) hardware and CPU speeds.
There is a very small chance your existing older CPU or motherboard can be replaced with one supporting a higher speed or more powerful chip.
Unfortunately, it’s unlikely, and typically more cost effective to replace the machine.
Things that aren’t reasons
There are a few things people point to as reasons they believe their computer is slowing down that aren’t reasons at all.
Even worse, over the years we’ve seen attempts to capitalize on ignorance of how computers work to sell the digital equivalent of snake oil: solutions to speed up your computer that do nothing at all.
I know lots of people love to blame the registry for performance issues. There are a number of companies that would be happy to sell you a tool to fix these supposed registry problems.
While there are circumstances in which the registry can contribute to performance issues, it’s not anywhere close as common as those folks would lead you to believe.
Most of the time, “cleaning” your registry is a waste of time. Couple that with the very real risk that a registry clean can damage the information stored in the registry and cause more problems than it might solve, it’s just not worth the time or risk.
I’m shocked to see this still floating around. It applied to old versions of Windows, as in Windows 95 and 98. Current versions of Windows do a fine job of managing their own memory, thank you very much. So called “RAM cleaners” or “RAM defragmenters” or other third-party RAM management tools try to second-guess Windows’ own optimizations and either do little or nothing to help, or actually make things slower.
If things are really that bad, a reboot will give you the benefits of starting over with a clean slate.
Related articles: so many reasons your computer is slow
If you found this article helpful, I’m sure you’ll also love Confident Computing! My weekly email newsletter is full of articles that help you solve problems, stay safe, and give you more confidence with technology. Subscribe now and I’ll see you there soon,
This post was written by Leo Notenboom and was first posted to AskLeo.com
Do you find this article helpful? Your Friend might too. So, please Share it with them using the Share button above.
Will you like to get notified when I post new updates? Then Follow me on any of my social media handles: Google News, Telegram, WhatsApp, Twitter, Facebook, Pinterest.
You can also drop your email address below if you wish to be notified by mail.